The background colour is grey. The brigtness of grey and black is near. Users may not be easy to read the black text. They may need to increase their
monitors' brightness to read the black text.
May there be any chance to use a brighter colour to replace the black colour in future versions? Thank you very much!!!
CicTec - 7-3-2019 at 09:19 AM
Hi ahmok,
Which system text do you refer to? The IDE in general, a code editor, another IDE tool, an FNT loaded into the program.
Any screenshot would be very useful.ahmok - 7-3-2019 at 12:42 PM
Hello, this color, thank you.
[Edited on 7-3-2019 by ahmok]CicTec - 7-3-2019 at 08:09 PM
Hi,
I think we can change (in fact, other texts are white, etc ...) you should modify the help file to get this.ahmok - 8-3-2019 at 12:46 AM
I think we can change (in fact, other texts are white, etc ...) you should modify the help file to get this.
Ok, thank you. dom cook - 8-3-2019 at 05:15 AM
By the way Cic Tec, seeing as you're looking at problems concerning dark ink at the moment, is there any chance of figuring out the problem where the
numbers often go black after the graphic editor has been used?
Much obliged.CicTec - 8-3-2019 at 09:19 AM
Hi dom,
I tried to use the graphic editor but I do not see any color alteration.
Should any specific procedure be performed to cause this?dom cook - 8-3-2019 at 11:40 AM
So far I haven't noticed a pattern. It seems random with a frequency of about 20%. I'll pay more attention and see if I can figure out any
particular actions while in the editor that are causing it.
